Ill make this short and to the point. I have been testing some projos from Cutting Edge. There are two versions. There is a 375 gr. and a 400 gr. in addition to the 350 gr. that has been around for a while now.
Heres the skinny, the 375 gr. runs 3150 or so and accuracy is very good. I have fired several 300 yd three shot groups that were under 1 in. I fired these from two barrels. One was an 8 constant twist and the other was a 6.5/13 gain twist Bartlien. It liked the 6.5 twist much more than the 8, I fired a three shot group at 1000 yds that was 2.75 in. center to center. The 400 gr run around 3000 and the 300 yd group was under an in. out of the 6.5 twist. I fired a three shot group at 1000 that measured 5.75 center to center.
Heres the skinny, the 375 gr. runs 3150 or so and accuracy is very good. I have fired several 300 yd three shot groups that were under 1 in. I fired these from two barrels. One was an 8 constant twist and the other was a 6.5/13 gain twist Bartlien. It liked the 6.5 twist much more than the 8, I fired a three shot group at 1000 yds that was 2.75 in. center to center. The 400 gr run around 3000 and the 300 yd group was under an in. out of the 6.5 twist. I fired a three shot group at 1000 that measured 5.75 center to center.