Case Trimming - RCBS Trim Pro and 3-Way Cutter

Discussion in 'Reloading' started by Ryan55555, Nov 29, 2008.

  1. Ryan55555

    Ryan55555 Well-Known Member

    Messages:
    68
    Joined:
    Jan 27, 2005
    I am considering purchasing a RCBS Trim Pro Power Case Trimmer to help speed up my case prep process. I am also interesed in using a Trim Pro 3-Way cutter with it.

    Do they work well? Are they worth the investment? How about the Case Trimmer Collets?

    I am currently using the Lee trimmer that I put on my cordless drill which works well but it seems difficult to get the case to spin without some wobble in it. I am looking to be a bit more precise.

    Thanks,

    Ryan
     
  2. goodgrouper

    goodgrouper Well-Known Member

    Messages:
    2,705
    Joined:
    Sep 3, 2004
    The 3 way trimmer is OK for bulk brass but it doesn't work as good for precision work. The only trimmer method that can cut without running a pilot into the neck is the Wilson type trimmers. They are actually quicker to use too.
     

  3. Nomad

    Nomad Banned

    Messages:
    366
    Joined:
    Jul 1, 2007
    Have used the three way cutter for the past 5 or so years
    Great is what I say. Have done match brass as well as others.
    Using older RCBS cutter and a hand crank works....