new shooter
Well-Known Member
Ho makes a trimmer that will work for 338 Lapua ? I just tried my lyman trimer it would not fit. I would like to get one with Micrometer Adjustment. Thanks for info. Joe
This is what I use with no complaints.
SINCLAIR INTERNATIONAL : Sinclair Stainless Ultimate Trimmer -
Ho makes a trimmer that will work for 338 Lapua ? I just tried my lyman trimer it would not fit. I would like to get one with Micrometer Adjustment. Thanks for info. Joe
I was thinking of getting one but can't find a case holder for the edge can someone help out thanks
I have not looked for that case holder in the Wilson, but you might want to check the L.E. Wilson website. Sinclair dosn't carry everything they sell. If they do, be sure tobuy a holder for a new case and a once fired case. If you have the chambering reamer you can make your own case holder with a couple pieces of CRS bar stock (1" I think).
gary
Separate new and fired case holders are only needed/offered for cases that have relatively little body taper. Wilson only makes the 338 lapua holder in the fired version.
If you are going to make your own, make sure you have a means of accurately boring the pilot hole at least parallel to the axis of the bar stock, and preferably co-axial.
Andy