Berger load data for .300 Weatherby

bleeds blue

Member
Joined
Apr 25, 2011
Messages
6
Location
Northern Utah
I just purchased some 185gr 30 cal VLD hunting bullets for my .300 Weatherby. I emailed Berger and they sent me the following data.
Does anyone have any actual experience or other loads for this combo?

00 Weatherby Magnum
Bullet Powder Start Load Approximate Start Velocity Max Load Approximate Max Velocity Fill Ratio
185 Grain RE-22 72.0 2809 78.5 3057 96.4%
185 Grain AA MAGPRO 76.0 2811 82.7 3076 96.8%
185 Grain H4831 SC 73.5 2786 79.5 3021 95.5%
185 Grain IMR 7828 SSC 72.5 2826 78.7 3073 95.1%
185 Grain NORMA MRP 73.0 2839 79.3 3080 95.3%
185 Grain Ramshot Magnum 78.5 2808 85.4 3090 99.0%
185 Grain VIHT N165 72.5 2742 78.7 2965 97.7%
185 Grain WW WXR 72.5 2814 78.8 3053 95.2%
185 Grain H1000 75.0 2702 83.5 3041 100.7%
185 Grain RETUMBO 78.0 2842 85.0 3097 104.9%
185 Grain IMR 4831 64.5 2706 71.8 2963 93.0%
185 Grain RE-25 73.5 2781 82.0 3092 102.2%
 
Last edited:
80.5 grains of H-4831 with a cci 250 primer will give you near 3200 fps safely with deadly accuracy in every 26" barrel Mk5 I ever used. Be sure the barrel is free floated. I-7828 will go over 3200 fps max accurately and safely. Start at 83 grains and work up. For legal reasons those loads are for rifles without the wby freebore. I have worked with the 300 wby for 40 years.
 
210 Berger VLD
84 gr H1000
Federal 215
Nosler brass
3.650 COAL
3000 fps in factory Accumark.
 
210 Berger VLD
84 gr H1000
Federal 215
Nosler brass
3.650 COAL
3000 fps in factory Accumark.

I also have a factory 300 Accumark. I tried the 190's with very little success. I plan on trying again this spring if we ever get one. It's going to snow this weekend! What kind of groups are you getting at 500 + yards?
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top