338 rum neck bushings

Discussion in 'Reloading' started by BOB COUSY, Mar 21, 2012.

  1. BOB COUSY

    BOB COUSY New Member

    Messages:
    4
    Joined:
    Mar 16, 2011
    I need some folks to measure their 338 rum Remington Brand brass neck thickness so I can pre order a bushing with the dies I am ordering. I have nothing to start with.
    OR you can measure some loaded rounds with Remington brass. I am using Hornady bullets. 225 gr Interlock-sst.

    I do realize I might miss the exact fit and have to re order.
     
  2. GNERGY

    GNERGY Guest

    Neck thickness 20 brass measured .0125 to .013 thick.
    neck OD with bullet seated 20 measured .365 to .367 225 gr Barnes TTSX
    I size the neck to give me .002 to .003 neck tension.
    Tarey
     

  3. 375fan

    375fan Well-Known Member

    Messages:
    297
    Joined:
    May 3, 2010
    With 225 accubonds, mine are (the majority) are measuring .365 with the others going .364 - .366.
     
  4. BOB COUSY

    BOB COUSY New Member

    Messages:
    4
    Joined:
    Mar 16, 2011
    Thanks guys. I am good now!:)