264 Win Mag Load

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by Tightline2001, Feb 18, 2010.

  1. Tightline2001

    Tightline2001 Active Member

    Messages:
    43
    Joined:
    Dec 21, 2009
    I have a 700 sendero in the 264 win mag and was wondering if anyone has found some good loads shooting the berger 130 and 140 vlds? if so i would appreciate any information greatly.
     
  2. Popapi

    Popapi Well-Known Member

    Messages:
    732
    Joined:
    May 3, 2006
    Start here
    264 Win. Mag. - 24hourcampfire

    264 win mag loads - 24hourcampfire

    Unverified load 5835 in caliber .264 Winchester Magnum

    Reloader's Nest Forum - .264 win mag (ruger 24 inch barrel)

    Reloader's Nest Forum - .264 Win. Mag.

    Reloader's Nest Forum - 264 win mag

    Reloader's Nest Forum - .264 win mag

    Reloader's Nest Forum - 140 grain Berger VLD in a 264 win mag
     

  3. Tightline2001

    Tightline2001 Active Member

    Messages:
    43
    Joined:
    Dec 21, 2009
    thanks for the links i really appreciate it
     
  4. Tightline2001

    Tightline2001 Active Member

    Messages:
    43
    Joined:
    Dec 21, 2009
    i have retumbo, h1000, imr4831, 7828 and h50bmg. i loaded up my first ones earlier today and decided to start with 61 grains of the retumbo with the 130 vlds and see how it likes there and go from there.
     
  5. Popapi

    Popapi Well-Known Member

    Messages:
    732
    Joined:
    May 3, 2006
    Tight your welcome, let me know how tha 130's work and also load. I'll be shooting 140's through mine when it's finished!
     
  6. apexmtnman

    apexmtnman Well-Known Member

    Messages:
    110
    Joined:
    Oct 15, 2008
    My load for my Rem 700 CDL SF is 68 grains of Retumbo WW case Fed 215M primer 140 gr Berger .010 off the lands. Shooting under moa at 100 yards, and velocity is 3166 fps with sd of less than 10.
    Best load I've found so far.
     
  7. Popapi

    Popapi Well-Known Member

    Messages:
    732
    Joined:
    May 3, 2006
    AWESOME!!!!! 26" barrel?
     
  8. Tightline2001

    Tightline2001 Active Member

    Messages:
    43
    Joined:
    Dec 21, 2009
    Thanks again for the input i will try that out. I was very please today with mine. after having boresited the scope within 3 shots i had it dailed in. at 100yds i had right at a 1/2'' group and at 150yds it was under an inch. again i loaded up 61 grains of retumbo, 130 berger vlds and cci 250 primers. i am going to chrono it shortly and see what im looking at as far as fps. i know i have plenny of more room to work with so i will see if i can tighten it up any. thanks again i will keep yall posted
     
  9. apexmtnman

    apexmtnman Well-Known Member

    Messages:
    110
    Joined:
    Oct 15, 2008
    Tightline
    Yea thats with a 26 inch barrel. I tried IMR 4831 and Re22 and could'nt get the velocity or the group size I wanted.
     
  10. Popapi

    Popapi Well-Known Member

    Messages:
    732
    Joined:
    May 3, 2006
    Guys been getting pretty good velocity from IMR 7828 and Retumbo!