25 PRC

[teejj]

You are building a 25-300PRC? 25-300 might be a tad much. Haha

I guess sarcasm doesn't come across too well on text.

 

[Bghunter338]

Oh oh I'll neck mine down off of 300 prc and get original and call if 25x300 prc.

 

[Bghunter338]

Looking to see if anyone is running a 25 PRC. Looking for load data (thinking the Berger 133's) and the process you used to get brass necked down (which dies, did you neck turn, etc). I have 100 pieces of ADG 6.5 PRC brass.

Thank you.

Here's another good idea.

.25-7 PRC Cartridge development and test results – West Texas Ordnance, Inc. | Custom Rifles & Accessories

 

[teejj]

View attachment 476420

There it is! Good reason to specify what a 25 prc is. 25-6.5 prc, 25-7 prc 25-300 prc

 

[koja]

Barrel on order.What are good starting loads for the 25-6.5 prc?

 

[Closetohome]

I am kicking around the same idea of a 25-6.5PRC but want to try it with 101 Barnes LRX, 100 TTSX, or maybe a 110 Accubond. Will likely try it on a Win 70 Post 64 lefty WSM action I have sitting around. Inside 500yds I wont benefit as much from the BC of the 133's so wont need as much freebore and can stick with a 9 or 10 twist barrel.

Was playing around in Quickload and think I can get the 101's well over 3500 with N560 or RL26 which would be getting up in 257 WBY territory.

 

[cbuck516]

When I re-barreled my 25-06 I was debating going to the 25 PRC, but I didn't want to have to change the bolt face so I went with the 25-06AI. I still think the 25 PRC sounds like a fun rifle. I have really enjoyed shooting my 300 PRC so I am sure the 6.5 PRC is equally as enjoyable as well as wildcats based on it.

 

[mullmann03]

View attachment 476420

Is this real? What velocities? What bullet? Barrel life of 500 rounds

 

[mullmann03]

Barrel on order.What are good starting loads for the 25-6.5 prc?

133 Berger, ADG brass, CCI BR2 primer, I think I started around 52gr of N565. My load uses 57.5gr suppressed.

 

[mullmann03]

I have an 18" barrel that would be great for a 25-7PRC. I can still get over 2900FPS with a 25-6.5prc though. Getting over 3K in my 22" barrel and it has not sped up yet.

 

[Bghunter338]

Is this real? What velocities? What bullet? Barrel life of 500 rounds

Oh it's real, the bullet in the picture is a 145gr blackhole bullet. I haven't built the rifle yet, but when I do I'll probably use the 160gr chinchaga bullets. If I where to guess you should be able to get the 145s up to 3400.

 

[mullmann03]

The 145gr would be great for a 25-7 or 25-300 prc. The 160 would be great for the 25-300.

 

[Seabeeken]

The barrel burner thread.

 

[FEENIX]

The 145gr would be great for a 25-7 or 25-300 prc. The 160 would be great for the 25-300.

I am using the 145 BH in my .257 WBY now and will giving the 160 a try when it finally comes out of production.