243 115 dtac load help

Remmy700

Well-Known Member
Joined
Aug 27, 2011
Messages
5,088
Location
Rio Rancho, New Mexico
Finally got everything to load up for my beanland built stiller action 243. Rifle has a kreiger 1 in 7.5 twist barrel and was wanting to try some 115 naked dtac's but I am having troubles finding load data. If anyone has any experience with these any powder choice and seating depth tips would be greatly appreciated. Already bought some bullets and lapua brass just was trying to see if anyone could point me in the right direction before loading some. Thanks in advance. Dan
 
With lapua brass I would start with 42grns of H4831sc and work up to about 45.5-46.5, .010" off the lands using CCI BR2 or Fed210M primers. Good luck. Be safe.
 
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top