140gr Barnes TSX

Ethan2000

Member
Joined
Jul 17, 2013
Messages
19
Location
Bozeman, mt
Been running these bullets for several years but took the range this weekend and the load had opened up to around 1 1/2 inch groups. Switched over to a 140 gr Barnes TTSX and the world returned to normal. The gun shot a 1/2 inch 2 touching a the third a breath away group. Which is its normal group and has been for years, but with the other Barnes bullet. Has anyone had their gun change what it likes to shoot? Everything has remain the same. Primer, powder, brass, seating depth...
 
I don't know about the 7mm bullets, but I know on the 270 130gr TSX's they changed the shape from a secant to tangent ogive a few years ago, and consequently I had to change the seating die, because the new ones seated deeper. Possibly this happened to you, and the seating depth is off?
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top