kstrick
Well-Known Member
Has anyone worked up any loads for .270 Win using Berger 150 gr VLD's?
Thanks
Kengun)
Thanks
Kengun)
270 Winchester loads with Berger 150gr hunting VLD
- Thread starter kstrick
- Start date
Help Support Long Range Hunting Forum
Kevin Thomas
Well-Known Member
Ken,
I'd recommend trying H4831 with the 150s, but there's a good range of powder today that'll suit the bill quite nicely here. H1000, Vihtavuori N160 or N165 or Reloder 19 would also be good choices, an dwell worth a try. Drop Berger a line and they'll email you their tables for the 270 Win, including (of course) the 150 grain VLD.
Good shooting,
Kevin Thomas
I'd recommend trying H4831 with the 150s, but there's a good range of powder today that'll suit the bill quite nicely here. H1000, Vihtavuori N160 or N165 or Reloder 19 would also be good choices, an dwell worth a try. Drop Berger a line and they'll email you their tables for the 270 Win, including (of course) the 150 grain VLD.
Good shooting,
Kevin Thomas
kstrick
Well-Known Member
I have loaded some 140s with RL22. Got good groups. I was surprised to see on the sheet I got from Berger that RL22 wasn't on the list for 150 hujnting vlds.
Is there that much difference in 140s and 150s???
Ken
Is there that much difference in 140s and 150s???
Ken
kstrick
Well-Known Member
I have loaded some 140s with RL22. Got good groups. I was surprised to see on the sheet I got from Berger that RL22 wasn't on the list for 150 hujnting vlds.
Is there that much difference in RL19 and RL22??
Ken
Is there that much difference in RL19 and RL22??
Ken
Kevin Thomas
Well-Known Member
Ken,
The RL-22 is a slower powder, but there will be some ovralp in applications. The 22 in this case would probably be quite usable, but may not have given as good of results as did the RL-19 whicvh was listed. Nature of the beast in doing reloading manuals; balancing time, resources and page space to those choices you think will best serve the greatest number of readers. Could have been nothing more complicated than that, or, they it may be that they just hadn't gotten to trsting the RL-22 just yet with this particular combination.
Kevin
The RL-22 is a slower powder, but there will be some ovralp in applications. The 22 in this case would probably be quite usable, but may not have given as good of results as did the RL-19 whicvh was listed. Nature of the beast in doing reloading manuals; balancing time, resources and page space to those choices you think will best serve the greatest number of readers. Could have been nothing more complicated than that, or, they it may be that they just hadn't gotten to trsting the RL-22 just yet with this particular combination.
Kevin
I'm going to complete my testing later this week but in my 26" barrel I'm using 57 gr of H4831SC in a rem case w/ GM210M primers. I don't have my notes handy but I think velocity was somewhere around 2850-2950. I had a single digit ES for 9 rounds. Going to confirm though.......your mileage may vary
I think "DerekM" has a load with IMR4350 that's about the same speed.
I think "DerekM" has a load with IMR4350 that's about the same speed.
remingtonman_25_06
Well-Known Member
I haven't tried the 150g vld, but I did use sierras 150g sbt in my .270.
I had the best results with RL-22 and H4831, both velocity and accuracy wise. Both were loaded at 57.5g and the RL-22 load would do 2950fps from the 22" bbl, the H4831 would do 2900fps. Both were 1/2-3/4 MOA shooters. Both would easily wack my 15" gong at 800 yards with regularity.
I tried H-1000 and ran out of case capacity trying to get the velocity I wanted, but was getting single digit ES's.
I had the best results with RL-22 and H4831, both velocity and accuracy wise. Both were loaded at 57.5g and the RL-22 load would do 2950fps from the 22" bbl, the H4831 would do 2900fps. Both were 1/2-3/4 MOA shooters. Both would easily wack my 15" gong at 800 yards with regularity.
I tried H-1000 and ran out of case capacity trying to get the velocity I wanted, but was getting single digit ES's.
I did complete the load this week it's 56.7 Gr of H4831SC, rem brass, and GM210M primers. I have an ES of 14 an SD of 4 and an average MV of 2888fps for 10 shots. My ES went up a bit from last time but I can live with this. Seems very, very accurate.
royinidaho
Well-Known Member
If you're lucky enough to be able to seat the base of the bullet, boat tail or flat base, no deeper than the base of the neck, you may wish to try 7828ssc. The ssc is much smaller than the RL-22 thus a bit more bang for the buck.
You can't get enough 4831 in the Winny case to cut the mustard. 60 gr of 4831 was a pretty severely compressed load in my rifle and resulted in well under the magic 3000 fps w/the 140s. 4831ssc may be a bit of an improvement.
Nearly 59 gr of RL-22 produces just under 3200 out of a 27" Lilja. Which seems like enough for a 270 winny.
With the 150 I'd really be interested in what 7828ssc would really do.gun)
You can't get enough 4831 in the Winny case to cut the mustard. 60 gr of 4831 was a pretty severely compressed load in my rifle and resulted in well under the magic 3000 fps w/the 140s. 4831ssc may be a bit of an improvement.
Nearly 59 gr of RL-22 produces just under 3200 out of a 27" Lilja. Which seems like enough for a 270 winny.
With the 150 I'd really be interested in what 7828ssc would really do.gun)
kstrick
Well-Known Member
Thanks for all the good info guys.
This is a great forum!
Thanks
Ken
This is a great forum!
Thanks
Ken
Dang Roy my factory tube just won't put up with the loads your Lilja will.
270 Sender0
Well-Known Member
270 Sender0
Well-Known Member
Have you found a load that works?
Muddyboots
Well-Known Member
You really need to try RL26 with the 150! This powder is the real pixie dust for the .270! You will be shocked by the velocities. Just be aware of pressure changes if load is worked up cold then shoot over 75 degrees or so. Alliant data good starting point.
