WTS Manners MCS-T for Savage SA (NEW)

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by MTDOGGER, May 5, 2013.

  1. MTDOGGER

    MTDOGGER <strong>SPONSOR</strong>

    Messages:
    131
    Joined:
    Feb 9, 2011
    I ordered this for a build but in between the LONG wait for the stock I got ancy and went another route. So I got this stock the other day and I no longer need it. Its a Brand new MCS-T stock inleted for the savage SA 4.4. It has two flush cups and one stud up front, it also has the 90% carbon shell. I paid 585 with the shipping, I will sell it for 535 TYD and you don't have to wait as long as I did. Thanks in advance.
     

    Attached Files:

  2. Cascade_Sherpa

    Cascade_Sherpa Well-Known Member

    Messages:
    156
    Joined:
    Mar 15, 2009
    I've got a question for you:

    Is the 4.4" dimension the length between the action screws? If not where is this dimension measured? I have a savage model 12 in .223 (so its a short action obviously) and I was curious where this measurement was taken and what barrel contour the stock will accept? I can measure the OD of my barrel.

    Thanks,

    John
     

  3. Cascade_Sherpa

    Cascade_Sherpa Well-Known Member

    Messages:
    156
    Joined:
    Mar 15, 2009
    Oh, and one other thing I forgot with the previous post. What DBM is the stock inletted for? Is it an aftermarket or factory savage inlet?

    Thanks again.

    John
     
  4. MTDOGGER

    MTDOGGER <strong>SPONSOR</strong>

    Messages:
    131
    Joined:
    Feb 9, 2011
    Your model 12 should fit right in. The barrel contour is for a factory heavy, and it is inleted for a blind box.
     
  5. 87predator

    87predator Well-Known Member

    Messages:
    132
    Joined:
    Sep 5, 2012
    If his m12 its a staggered feed then it won't fit. The center feed models are 4.4 and the sf models are 4.25 or something close. I wish this was long action.
     
  6. jbj

    jbj Member

    Messages:
    21
    Joined:
    Jan 25, 2013
    Yes, the 4.4" measurement is between the action screws. There are two common Savage short-action lengths, 4.27" (stagger feed, the mag box comes out of the stock with the action) and 4.4" (center feed, the mag box stays with the stock). There are two variations of the 4.4" with the bolt release on either the side of the action, or on the front of the trigger guard.
     
  7. MTDOGGER

    MTDOGGER <strong>SPONSOR</strong>

    Messages:
    131
    Joined:
    Feb 9, 2011
    Re: WTS Manners MCS-T for Savage SA (NEW) PRICE DROP

    Price drop. 500tyd