Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Wont chamber fire formed brass?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Guest" data-source="post: 23049"><p>Hi Moosehunter,</p><p>I had this happen once before also, you can change the case demenisions by just neck sizing.</p><p>On my 22-250 when I just necked sized some casing they would not go back into the chamber, I was using a FL die to just resize the neck. No good doing that way. </p><p>You will need to FL size to make sure that the case is to proper size at the "web" area, that mybe where they are sticking. Also check "headspace".</p><p>Hope this helps.</p><p></p><p>Got to thinking also that being you are using a 300 Mag your problem is probably going to be the area just above the "belt" on case. Most dies won't size this area. There is a gentlemen out here that make a special die for sizing thes type cases and it works very good.</p><p>Never have any more problems after using this die. <a href="http://larrywillis.com/" target="_blank">http://larrywillis.com/</a> </p><p></p><p>[ 08-13-2002: Message edited by: Coyote Hunter ]</p><p></p><p>[ 08-13-2002: Message edited by: Coyote Hunter ]</p></blockquote><p></p>
[QUOTE="Guest, post: 23049"] Hi Moosehunter, I had this happen once before also, you can change the case demenisions by just neck sizing. On my 22-250 when I just necked sized some casing they would not go back into the chamber, I was using a FL die to just resize the neck. No good doing that way. You will need to FL size to make sure that the case is to proper size at the "web" area, that mybe where they are sticking. Also check "headspace". Hope this helps. Got to thinking also that being you are using a 300 Mag your problem is probably going to be the area just above the "belt" on case. Most dies won't size this area. There is a gentlemen out here that make a special die for sizing thes type cases and it works very good. Never have any more problems after using this die. [url="http://larrywillis.com/"]http://larrywillis.com/[/url] [ 08-13-2002: Message edited by: Coyote Hunter ] [ 08-13-2002: Message edited by: Coyote Hunter ] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Wont chamber fire formed brass?
Top