Hodgdons does
[/QUOT
Thanks for the help but Hodgdons doesn't show any data on their site for 308.
They show cfe223 working well.I have had good luck with tac too. For accuracy hard to beat imr4064.4064 will not give you the best speed but very accurate.Just for giggles Iwould like to try R16 with a 165 or 175 and see if I could get to pressure with it.If you can get up to pressure with a little slower powder it usually gives very good results.I will play around with it and see what I can come up with, thanks for the help.
I called Hodgdon about this about 2 weeks ago. The gentleman told me that the powder was too slow for the 308, was dirty and did not perform well with the 308 Win, not even with medium to heavy bullets.
Powder burn rate chart......
It's right above VV N550
scschnur. I would say if it is shooting dirty it is being run at too low a pressure. Common with a lot of but not all ball powder. Tac is a ball and it is the cleanest powder I have ever shot.I have heard it is dirty and some say it's not . What do you all say?
The new speer data shows 3000 with alliant 2000mr with a 150 in the 308Any buddy have any reloading data for .308 in StaBall 6.5 powder?