S Stugotz Active Member Joined Nov 16, 2003 Messages 39 Location Fairmont, WV May 16, 2005 #1 Wondering if anyone knows how much torque for 8-40 base screws with a T-15 size head. I believe 6-32's are to be around 16 in/lbs with a T-10 head size.
Wondering if anyone knows how much torque for 8-40 base screws with a T-15 size head. I believe 6-32's are to be around 16 in/lbs with a T-10 head size.
J Jeff In TX Well-Known Member Joined Aug 10, 2003 Messages 408 Location McKinney TX May 16, 2005 #2 Anywhere from 15 to 20 psi. I use 20 psi on both my scope bases and rings. I would not recommend going over 20 psi on rings. Hope it helps.
Anywhere from 15 to 20 psi. I use 20 psi on both my scope bases and rings. I would not recommend going over 20 psi on rings. Hope it helps.
C chris matthews Well-Known Member Joined May 14, 2001 Messages 838 Location Urich, MO May 16, 2005 #3 I'll second the 15 to 20 INCH pounds.
S Stugotz Active Member Joined Nov 16, 2003 Messages 39 Location Fairmont, WV May 17, 2005 #4 Thanks Guys!