Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
The .338 Rogue
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Pdvdh" data-source="post: 1190762" data-attributes="member: 4191"><p>shortgrass extended the freebore with a throating reamer another 0.073" over what my chamber reamer cut.</p><p></p><p>I had the freebore lengthened so that the Berger 300gr OTM would touch the lands when the base of the bearing surface of the bullet was even with the shoulder. The boattail will extend back behind the case neck. The COAL with the Berger 300gr OTM touching the lands is going to be about 3.880". [EDIT 2/11/2018: The Berger 300gr OTM just touching the lands resulted in a COAL of <strong>4.013</strong>"]</p></blockquote><p></p>
[QUOTE="Pdvdh, post: 1190762, member: 4191"] shortgrass extended the freebore with a throating reamer another 0.073" over what my chamber reamer cut. I had the freebore lengthened so that the Berger 300gr OTM would touch the lands when the base of the bearing surface of the bullet was even with the shoulder. The boattail will extend back behind the case neck. The COAL with the Berger 300gr OTM touching the lands is going to be about 3.880". [EDIT 2/11/2018: The Berger 300gr OTM just touching the lands resulted in a COAL of [B]4.013[/B]"] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
The .338 Rogue
Top