this is a remington 700 bolt and action purchased straight from PTG, with everything done to it, timney elite hunter. Barrel is a 21inch douglas match barrel chambered in 260rem threaded with a blended thread protector. I don't remember the twist, or contour. The pictured group is literally my first handload ever. 3 shot group at 100yrds in 20mph gust. 127lrx, it has shot all factory loads I have tried under 1 inch with a few at .5 inch, I'm sure it will do better with load work up. Under 200rnds on this. The stock is a lvsf stock cut for bdl bottom metal, and bedded. All work was done by Joe collier of collier rifles. I have dies and
1400 shipped.
Add 500 for the mpr folding chassis.
This action was purchased straight from them, they do all the work, trueing,from the PTG Website:
This kit contains the following items:
1 - RH Blued Remington Action for a Short Action Remington 700, Trued
1 - RH PTG bolt with threaded handle, Blueprinted (.705 OD +/- .002)
Raceway is opened using a PTG guided raceway reamer
A PTG Remington Gen II receiver reamer is used to put I.D to proper diameter and to center line, true receiver lugs, and make receiver lugs and action face parallel.
A PTG piloted tap mandrel is used to chase the threads making them more true to center line.
A PTG bolt is fitted to the action, and the face of the bolt is trued while in the action
1400 shipped.
Add 500 for the mpr folding chassis.
This action was purchased straight from them, they do all the work, trueing,from the PTG Website:
This kit contains the following items:
1 - RH Blued Remington Action for a Short Action Remington 700, Trued
1 - RH PTG bolt with threaded handle, Blueprinted (.705 OD +/- .002)
Raceway is opened using a PTG guided raceway reamer
A PTG Remington Gen II receiver reamer is used to put I.D to proper diameter and to center line, true receiver lugs, and make receiver lugs and action face parallel.
A PTG piloted tap mandrel is used to chase the threads making them more true to center line.
A PTG bolt is fitted to the action, and the face of the bolt is trued while in the action
