stiller predator action in rem 700 stock

Discussion in 'Gunsmithing' started by killitgrillit, May 16, 2012.

  1. killitgrillit

    killitgrillit Active Member

    Messages:
    31
    Joined:
    Dec 5, 2011
    Can someone please tell me how much modification is necessary to put a stiller predator action into a stock inletted for a remmy 700 action??? and does it look good??
    Thx Again
     
  2. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    Should fall right in place. It is a remington clone. Dan
     

  3. shortgrass

    shortgrass Well-Known Member

    Messages:
    1,993
    Joined:
    Mar 31, 2010
    Bolt handle sweep may be just a tad different.
     
  4. Hired Gun

    Hired Gun Well-Known Member

    Messages:
    1,537
    Joined:
    Apr 21, 2003
    The loading/ejection port may be 3/8" longer than the regular Remington inlet. Easy fix wit a mill and a touch up kit.
     
  5. Centre Punch

    Centre Punch Well-Known Member

    Messages:
    676
    Joined:
    Oct 29, 2004
    I have a short Stiller Predator action which i dropped into a Mcmillan Winchester marksman stock inletted for Rem 700, fit is spot on and did not need any modification apart from a bit of relief in the bolt handle recess.

    Ian.
     
  6. killitgrillit

    killitgrillit Active Member

    Messages:
    31
    Joined:
    Dec 5, 2011
    Thx for the replies Gents, stock is ordered .