Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing down 6.5 lapua brass to 6
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Kevin Cram" data-source="post: 389251" data-attributes="member: 2215"><p>Nathan, </p><p></p><p> You won't be able to neck them down with just the bushing die. Your moving the shoulder down and a little forward also from where it was 6.5 as well as necking it down to 6mm. Like mudbug said he did, use a full length resizing die. Just run it through the resizing die until you see it just making contact with the shoulder. If your chamber is a no turn neck try it in the gun. If it's a turn neck you'll need to turn your necks to fit and see if you sized it enough to fit for fire forming.</p></blockquote><p></p>
[QUOTE="Kevin Cram, post: 389251, member: 2215"] Nathan, You won't be able to neck them down with just the bushing die. Your moving the shoulder down and a little forward also from where it was 6.5 as well as necking it down to 6mm. Like mudbug said he did, use a full length resizing die. Just run it through the resizing die until you see it just making contact with the shoulder. If your chamber is a no turn neck try it in the gun. If it's a turn neck you'll need to turn your necks to fit and see if you sized it enough to fit for fire forming. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sizing down 6.5 lapua brass to 6
Top