scope clearance

att22250

Member
Joined
Apr 28, 2005
Messages
12
could any one tell me how much clearance i need from my scope to my barrel i have a lvsf 308 and just put a nikon gold on it and its almost touching the barrel but i hate to go to high rings.thanks
 
If it's not touching you should be fine. Can you slide a piece of paper between them without touching?
 
yeah i can slide a piece of paper. i can fold a piece and it will go through with a little wiggle.should that enough clearance. thanks
 
Are you planing on using flip up covers or anything such as that with it? If so there needs to be enough clearance for them and then some. As long as it's not touching that should be good. If it's an AO you may want to rotate it and check all around.
 
Put a piece of plain paper and a piece of carbon paper in the gap. Fire the rifle. If the carbon marks the plain sheet, you're too low.
 
Warning! This thread is more than 20 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top