Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Savage 111 questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ajstew32" data-source="post: 940690" data-attributes="member: 79538"><p>Thanks for the reply johnny k! That would make sense why the accuracy might be failing but it wasn't the greatest when i first started shooting it. Its basically new but to get it fixed will take a fair bit of time and bear season is quite close so ill try cleaning it up. Ive gotten a 1" group with Accubonds but only going like 3050 fps which doesn't put much energy out a long range. I've tried 140 accubond, 150 ballistic tip, 140 set and 150 interbonds. The interbond were the last loads i tried before the problem stared happening and i forgot to mark the holes so i might have a load that had 3 in the same hole and one 3/4" left. could also be 2 touching, one of the the left and a flyer that i cannot find. Anyways these are only got about 2850 fps which isn't desirable when others are getting above 3000 in their rifles. </p><p></p><p>As for bedding i have some Devcon plastic steel on the way and will try bedding it when it comes. Its different though with the stock i have only having a back part for the recoil lug, nothing holding the front of it...</p></blockquote><p></p>
[QUOTE="ajstew32, post: 940690, member: 79538"] Thanks for the reply johnny k! That would make sense why the accuracy might be failing but it wasn't the greatest when i first started shooting it. Its basically new but to get it fixed will take a fair bit of time and bear season is quite close so ill try cleaning it up. Ive gotten a 1" group with Accubonds but only going like 3050 fps which doesn't put much energy out a long range. I've tried 140 accubond, 150 ballistic tip, 140 set and 150 interbonds. The interbond were the last loads i tried before the problem stared happening and i forgot to mark the holes so i might have a load that had 3 in the same hole and one 3/4" left. could also be 2 touching, one of the the left and a flyer that i cannot find. Anyways these are only got about 2850 fps which isn't desirable when others are getting above 3000 in their rifles. As for bedding i have some Devcon plastic steel on the way and will try bedding it when it comes. Its different though with the stock i have only having a back part for the recoil lug, nothing holding the front of it... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Savage 111 questions
Top