Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Savage 11/111 338 lapua case sticking problems
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jcoop" data-source="post: 751845" data-attributes="member: 13125"><p>For what its worth I have a full custom on a Stiller action and Pacnor barrel. I fired Hornady factory ammo that someone gave me. It cycled perfectly. I then tried to reload the brass and every piece I fired in this rifle stuck to the point I had to tap the brass out with a rod and the bolt was very stiff. I then pulled the matchkings from what I had not fired and transfered the powder over to lapua brass and have had no problems at all. Not a sticky bolt or hard extraction. This load is a max load of 92 gr of h1000. There were no pressure sings on either brass other than the Hornady brass sticking in the chamber. I assure you I have a good chamber and the brass is the only diference.</p></blockquote><p></p>
[QUOTE="jcoop, post: 751845, member: 13125"] For what its worth I have a full custom on a Stiller action and Pacnor barrel. I fired Hornady factory ammo that someone gave me. It cycled perfectly. I then tried to reload the brass and every piece I fired in this rifle stuck to the point I had to tap the brass out with a rod and the bolt was very stiff. I then pulled the matchkings from what I had not fired and transfered the powder over to lapua brass and have had no problems at all. Not a sticky bolt or hard extraction. This load is a max load of 92 gr of h1000. There were no pressure sings on either brass other than the Hornady brass sticking in the chamber. I assure you I have a good chamber and the brass is the only diference. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Savage 11/111 338 lapua case sticking problems
Top