remington 700 locktime

guru

Well-Known Member
Joined
May 24, 2006
Messages
156
Location
Ridgeland,MS
Has anyone tried any of the aftermarket bolt shroud & firing assy. My sendero seems to have slower lock time than normal. Mine does have the j-lock could that be slowing it down ?
 
Has anyone tried any of the aftermarket bolt shroud & firing assy. My sendero seems to have slower lock time than normal. Mine does have the j-lock could that be slowing it down ?

Yes and I have had good luck with them, but some said they did not (Not sure why) but any
time you reduce the lock time there is potential for improvement in accuracy.

They do reduce lock time and help some shooters But not all.

The J-lock does not have any thing to do with the lock time , It is just a fireing pin
enteruptor (It prevents the fireing pin from falling when activated even if the
trigger sear is disengaged by pulling the trigger).


J E CUSTOM
 
the only way i would go with the lighter pin assy is if you do a lot of off-hand shooting. otherwise i would stay with the factory weight pin. make sure your spring is 26 or 28 lbs but stay away from the light pins.
 
Warning! This thread is more than 16 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top