Rem. 700 Short F/S

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by Kevin Cram, Nov 13, 2012.

  1. Kevin Cram

    Kevin Cram <b>SPONSOR</b>

    Messages:
    1,157
    Joined:
    Mar 9, 2004
    Hey guys, I have a fully blueprinted Remington action, .308 bolt face w/ factory extractor and Holland Recoil Lug for up for sale. The action is single point trued using GTR tooling. The threads are opened up .005" and the recoil lug is bored over that amount as well. The action is fully ready to be installed on a new custom barrel. I've been blueprinting actions this way for 10 years using GTR tooling. I also did a video of my process on youtube if you want to see how it's done.

    [ame=http://www.youtube.com/watch?v=pGn9qWJIM9M]Remington Action Blueprint 1 - YouTube[/ame]

    The complete package is $600 plus shipping to your FFL. Or I'd be more than happy to barrel it up for you. If you break everything down the action itself is only costing $375.

    Blueprint - $175
    Holland Recoil Lug / Bored and Fitted - $50
    Remington Action - $375


    Remington S:A #1.jpg

    Remington S:A #2.jpg

    Remington S:A #3.jpg

    Remington S:A #4.jpg
     
  2. JUDD

    JUDD Well-Known Member

    Messages:
    935
    Joined:
    Jun 25, 2007
    Stocking trued R700's now?

    Hmm I smell Ready to ship rifles soon!

    Great deal from a quality builder here!
     

  3. Strick9

    Strick9 Well-Known Member

    Messages:
    361
    Joined:
    Nov 16, 2007
    Do you have a high quality 7mm ie Brux, Rock, etc barrel in a med contour say #4-5 straight or spiral fluted to finish at 20 " you could chamber in 708 to run the berger 140s to screw on there?
     
  4. Kevin Cram

    Kevin Cram <b>SPONSOR</b>

    Messages:
    1,157
    Joined:
    Mar 9, 2004
    The only extra 7mm barrel I have is a Brux 1-9 twist #6 contour. 6 straight flutes and will finish at 29"