Rem 700 Custom Built 22-243win

Discussion in 'Guns For Sale' started by OKbow87, Feb 9, 2010.

  1. OKbow87

    OKbow87 Well-Known Member

    Messages:
    170
    Joined:
    Feb 22, 2006
    I have to part ways with a stick that is very dear to me. I am making the decision for the greater good of my arsenal. I have for sale a Custom Built (Steve Baldwin) 22-243 win off a Rem 700 SA. The action was originally an SPS Varmint in 243. The barrel was taken off almost immediately and replaced with this 26.5" Hart 1:8 twist .224 cal barrel. It has a target crown and the Contour on the Hart is the Max HV. It finishes up at about .900". It has been Cerakoted black by a different smith in Weatherford, OK. The rifle comes with a bedded McMillan A3 with 3 studs, 2 flush cups on the the left and a declarator recoil pad. It is inletted for Badger M5 metal from the factory and it comes with 1 5rd AI magazine. Additionally the gun comes with the OD TIS sling, Badger Knob and the Ken Farrell Low Profile 20 MOA one piece base. The rifle has exactly 350 rounds down the tube all with Lapua brass 80gr Amaxs or 80gr VLDs with 7828ssc. I have 250rds plus a twice fired set of an additionally 50rds of brass all included in Berry's 50rd Boxes. I would really like to see these go with the gun as I will be getting new brass with my new build. (Triad Bag not included)

    The gun shoots very good and with a good driver consistently shot around 1/2 MOA or better. I do not have any recent groups because the gun has hardly been fired in the last year, except to test loads and the initial break in since it has been built, which is another reason why I'm selling, it just doesn't get the use it deserves sitting in my stable. Rifle is in Excellent shape and has few if any marks or scratches. I hunted with it less than 5 times.

    Please feel free to pm me for any additional info.

    Quick List of Specs:
    Rem 700 Action
    Badger Bolt knob
    Hart Max HV 1:8 twist barrel 26.5"
    Badger M5 Bottom Metal
    Timney Trigger set @ 1lb 5oz +or-
    Bedded McM A3 in Sage molded camo (Woodland Beige,Med Tan, Dark Grey.)
    TIS sling OD
    Ken Farrell 20 MOA Low pro one piece base
    250rds of Loaded 22-243win Lapua Brass with 44.6gr of 7828ssc and 80gr Amaxs with Fed 210 GMM primers.
    50rds of additional twice fired Lapua brass to make 300 total pieces of brass.
    $1450 shipped & insured to your FFL SPF

    With Nightforce NXS 5.5-22x56 Np-1rr reticle MOA knobs and Ken Farrell Standard Aluminum rings (in Pictures)
    $2850 shipped & insured to your FFL SPF

    No Trades please, but I would consider parting out as long as I could keep barreled action together.


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Feb 10, 2010
  2. ogallala_1

    ogallala_1 Well-Known Member

    Messages:
    205
    Joined:
    Mar 25, 2008
    pm on the way.

    John
     

  3. loaders_loft

    loaders_loft Well-Known Member

    Messages:
    1,009
    Joined:
    Feb 11, 2008
    what are you using for dies on this setup? Super nice rig there sir!
     
  4. huntfish

    huntfish Well-Known Member

    Messages:
    294
    Joined:
    Aug 19, 2008
    Drool
     
  5. Sendero_Man

    Sendero_Man <strong>SPONSOR</strong>

    Messages:
    1,706
    Joined:
    Feb 4, 2007
    what does it weigh it at with scope ?

    pm sent on SH
     
  6. clcdws

    clcdws Member

    Messages:
    12
    Joined:
    Feb 15, 2009
    PM Sent
     
  7. OKbow87

    OKbow87 Well-Known Member

    Messages:
    170
    Joined:
    Feb 22, 2006
    Thanks for all of the pms and the interest guys. The rifle is SPF. I have the contact info of the next in line.

    Thanks