Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reloading equipment question
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="FL_SquirrelHunter" data-source="post: 1625614" data-attributes="member: 109986"><p>Hi Steve, those are bottleneck so you will need case lube or wax. You will need a die set for each caliber which (by default) includes a decapping pin in the sizing die. You will also need two shell holders, one for the 308 & 7mm-08, the other for the .223. If you have only one rifle in a caliber, then a neck sizing set will do, but buying a full length sizing set is about the same cost and will work with any rifle in that caliber. You will need a press, single stage is fine and probably better for low volume shooting because it forces us to concentrate on doing one thing well at a time. You are going to crush some cases, it's part of learning. You will need a load data for the actual powder(s) you intend to use. You will need a scale which supports tare weight zeroing to measure the amount of powder, something which doesn't spark to put your powder into on its way to the case and a similar non-sparking funnel to get the measured powder into the case. You will need something to delicately sweep away and hold (trash can) small amounts of dropped powder/dust (it happens). Because single stage press work tends to result in batches you will need a tray to hold work-in-progress cases so they don't spill. (The press will move the bench a little.) You will need a set of clamps (or bolts) to keep the press in place while you work. </p><p></p><p>Pretty sure that a trip to the hardware store and a Lee Anniversary kit will satisfy what you have to have to get started at a nice low price. Most importantly, you need some clean, relaxing space to work with a couple of free hours to take your time and get the first loads. </p><p></p><p>What you don't need, but I highly recommend, is a good reloading book (second hand is fine) to peruse on the throne. Lee's manual reads like a friend is talking with you about his hobby, but any good manual will do. </p><p></p><p>I use some Lee die sets (they include shell holders, btw) but have an RCBS press and Hornady scale with Lyman manual. Single stage (and turret) presses all work pretty much the same way; I think only the warranties differ among brands.</p><p></p><p>Oh, you will also need a loving spouse who accepts your new avocation ... or a very good lawyer. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile :)" loading="lazy" data-shortname=":)" /> Welcome to the club. Stick with published loads and stay safe!</p></blockquote><p></p>
[QUOTE="FL_SquirrelHunter, post: 1625614, member: 109986"] Hi Steve, those are bottleneck so you will need case lube or wax. You will need a die set for each caliber which (by default) includes a decapping pin in the sizing die. You will also need two shell holders, one for the 308 & 7mm-08, the other for the .223. If you have only one rifle in a caliber, then a neck sizing set will do, but buying a full length sizing set is about the same cost and will work with any rifle in that caliber. You will need a press, single stage is fine and probably better for low volume shooting because it forces us to concentrate on doing one thing well at a time. You are going to crush some cases, it's part of learning. You will need a load data for the actual powder(s) you intend to use. You will need a scale which supports tare weight zeroing to measure the amount of powder, something which doesn't spark to put your powder into on its way to the case and a similar non-sparking funnel to get the measured powder into the case. You will need something to delicately sweep away and hold (trash can) small amounts of dropped powder/dust (it happens). Because single stage press work tends to result in batches you will need a tray to hold work-in-progress cases so they don't spill. (The press will move the bench a little.) You will need a set of clamps (or bolts) to keep the press in place while you work. Pretty sure that a trip to the hardware store and a Lee Anniversary kit will satisfy what you have to have to get started at a nice low price. Most importantly, you need some clean, relaxing space to work with a couple of free hours to take your time and get the first loads. What you don't need, but I highly recommend, is a good reloading book (second hand is fine) to peruse on the throne. Lee's manual reads like a friend is talking with you about his hobby, but any good manual will do. I use some Lee die sets (they include shell holders, btw) but have an RCBS press and Hornady scale with Lyman manual. Single stage (and turret) presses all work pretty much the same way; I think only the warranties differ among brands. Oh, you will also need a loving spouse who accepts your new avocation ... or a very good lawyer. :) Welcome to the club. Stick with published loads and stay safe! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Reloading equipment question
Top