Pictures of your longrange rigs!

Im lovin it.
Thanks bud, you should start a thread on 300AI. I've only seen the short version of the AI.
I need a reamer.
Those little Bama whitetails are doomed!!!

+1. This is a wildcat that until now knew nothing about. Very cool. Definitely start a thread on this 300AI !!

I started one a couple years ago on a different LR forum before I built mine... There's some good info there. PM me and I'll let you know which forum it is.
 
My latest build. Fosnaugh Custom 6.5x47 Lapua

24" Brux fluted 8.5 twist, Rem. Varmint contour
Borden Alpine action
McMillan bottom metal
McMillan Edge Rem. Varmint stock
Jewell trigger
Nightforce ATACR in Seekins rings on Murphy Precision base.

(and yes I know the vane on my Kestral's upside down. I realized it after I took the pic)



Best group at distance I ever shot in my life. 701 yards from a cold bore. Factory Lapua 139gr. ammo @ 2652fps. Being relatively new at this I was pretty pumped. Now I'm hooked:D

 
Last edited:
Terrific shooting and **** nice bench as well. Did you build the bench?





My latest build. Fosnaugh Custom 6.5x47 Lapua

24" Brux fluted 8.5 twist, Rem. Varmint contour
Borden Alpine action
McMillan bottom metal
McMillan Edge Rem. Varmint stock
Jewell trigger
Nightforce ATACR in Seekins rings on Murphy Precision base.

(and yes I know the vane on my Kestral's upside down. I realized it after I took the pic)



Best group at distance I ever shot in my life. 701 yards from a cold bore. Factory Lapua 139gr. ammo @ 2652fps. Being relatively new at this I was pretty pumped. Now I'm hooked:D

 
Thanks Randy.

I did not build the bench. It's a Legacy Shooting bench. They're an advertiser here on the site. Best investment I made for a simple portable shooting bench. Sets up in about a minute in a half and is pretty sturdy.
 
Here are my current customs
Top is my 6mm-06 savage, pac-nor 28"
Bottom is my 22-250 ai, rem 700
 

Attachments

  • 20151018_162538.jpg
    20151018_162538.jpg
    172.1 KB · Views: 107
  • 20150315_184428.jpg
    20150315_184428.jpg
    182.9 KB · Views: 124
New rifle for the stable and it's a shooter! Took about 7-9 shots for the barrel to settle in, once it did it printed a .151CTC 3 shot group at 100 yards shooting factory Hornady 129gr sst's. It's an absolute pleasure to shoot.
GAP-10
6.5 creed
1:8.2 21" bartlein barrel
APA Little Jimmy Brake
 

Attachments

  • image.jpg
    image.jpg
    225 KB · Views: 82
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top