Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Operator error or what?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="TheRoaminRaider" data-source="post: 660806" data-attributes="member: 26087"><p>Ok guys, I'm still pretty new at reloading so cut me some slack if this is a rookie mistake. I got a new rifle (Remmy 700 in 308win) and sat down to start taking measurements to start working up loads for it. I used the Hornady OAL gauge and comparator and took about a dozen readings. Every one of them was at least .027 over the maximum COAL listed in the hornady manual. I'll try to get a pic up if it will help, but basically the bullet just sticking WAY out there. Is this something I'm doing wrong or is it maybe the chamber was cut too deep or something?</p></blockquote><p></p>
[QUOTE="TheRoaminRaider, post: 660806, member: 26087"] Ok guys, I'm still pretty new at reloading so cut me some slack if this is a rookie mistake. I got a new rifle (Remmy 700 in 308win) and sat down to start taking measurements to start working up loads for it. I used the Hornady OAL gauge and comparator and took about a dozen readings. Every one of them was at least .027 over the maximum COAL listed in the hornady manual. I'll try to get a pic up if it will help, but basically the bullet just sticking WAY out there. Is this something I'm doing wrong or is it maybe the chamber was cut too deep or something? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Operator error or what?
Top