Ogive to tip measurements

[fabricator21]

Does anybody have the ogive to tip measurements for a 6.5mm 140 grain berger hunting vld and a nosler 140 accubond

 

[MagnumManiac]

Does anybody have the ogive to tip measurements for a 6.5mm 140 grain berger hunting vld and a nosler 140 accubond[/QUOTE
I do, but what do you need it for?
The base to give length is much more important.

Cheers.

 

[jimbires]

go to the bottom of this page and click on the yellow block "quick reference sheet"

http://www.bergerbullets.com/products/hunting-bullets/


I looked at this not long ago , I didn't look for nosler specs .

 

[fabricator21]

[QUOTE="MagnumManiac, post: 153
This information will give me an idea how close to the lands will be at mag length.
Thanks for sharing

 

[Dosh]

21, the measurement you are looking for will need to be an average of a number of the 140 Bergers. There is a variation in lengths, though minor in the 140's and in some other brands the variation in much larger. Base to ogive is fairly consistent. Haven't used the 140 Accubonds. You'll need to allow a bit of wiggle room in the mag box as well. Good luck