N570 for 300 weatherby

JAG0588

Active Member
Joined
Dec 19, 2022
Messages
25
Location
North Dakota
Is anyone using N570 in their 300 weatherby? I'd like to try it. Planning on shooting 212eld-x and 210ABLR. I'm just finding very limited information on min. Max charge etc. if anyone is using it and would be willing to share info I'd appreciate it

Thanks
 
Case capacity is pretty close to a 30 Nosler I would look at starting loads there. Max charge you will have to find in your gun.
 
I have a throated 300 wby that I'm running 230 berger OTMs in. As I was walking up my pressure test I began to see pressure around 81grs. Stiff bolt lift and showing ejector marks to 82.0 grs. I was coming up in .2 gr increments. I kept going with the pressure test expecting it to get worse but all of a sudden it disappeared at 82.5 grs.. I walked up to 85 grs. Of n570 ( magic fairy dust) without any more pressure issues. I now run the 230 OTMs at 3000 fps with 85.0 grs of N570. This is what my gun takes. This is in no way , shape or form a load recommendation. You need to test and work up in your specific rifle. These are my results and you should proceed with caution.
 
Has anyone noticed a difference in the amount of carbon between 568 and 570?
I know 568 doesn't usually get the same velocity but I'm hoping it's got less residue to deal with
 
This was my last work up. Proceed with caution.
 

Attachments

  • 20230503_212617.jpg
    20230503_212617.jpg
    1.3 MB · Views: 52
Top