Looking for savage prefits!

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by backwoods83, Nov 30, 2011.

  1. backwoods83

    backwoods83 Well-Known Member

    Messages:
    2,206
    Joined:
    Jan 8, 2011
    I'm looking again for more extra barrels, 243 or 243ai 8 twist, 300wm 10 twist, any weatherby calibers from 257 to 340, 338 edge, 6.5x284 8 twist, 308win 11 twist, looking for 26" or longer in savage varmint or heavier contour, but will consider others, let me know what you have, thanks.
     
  2. Oliveralan

    Oliveralan Well-Known Member

    Messages:
    991
    Joined:
    Sep 15, 2009
    depending on your offer, i may be willing to part with my 6.5 Voodoo (straight 6.5-300win mag) barrel. It is a prefit 28" 1-9twist SS mcgowen varmint contour barrel.

    Has at most 250-275rounds down the barrel. Load has been developed that shoots consistently right at 0.5-0.6 (sometimes much tighter) moa at 200 and 300 yards. Pushes the 140 berger vld at 3388fps. Supersonic to a mile, mild recoil, 13" of drop (holdover territory) from a 200yard zero to 400yards.

    Only reason i'm considering selling it is because i will soon have a 338 cal suppressor available and would like to use it to it's full potential (I.E. on a .338 rifle).
     

  3. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    I'll sell my 338 Edge barrel for $475 shipped.

    It is a 32" stainless fluted McGowan in a #7 contour. It has a Ross Schuler 3 port brake on it. Less than 60 rounds through it.


    I also have a 27" stainless Kreiger in 300wsm. The contour is about a #5. Heavier than a magnum, lighter than a varmint. Very nice for a walking/carry rifle. $275 shipped.


    [​IMG]
     
  4. geargrinder

    geargrinder Well-Known Member

    Messages:
    1,972
    Joined:
    Nov 6, 2006
    Both are small shank.
     
  5. bosstom

    bosstom Well-Known Member

    Messages:
    269
    Joined:
    Dec 29, 2007
    I have a unfired 26" Shilen Match, small shank, 243ai 8 twist, savage varmint contour. I would take $300 for it, PM me if you are interested.
     
  6. mkg

    mkg Well-Known Member

    Messages:
    178
    Joined:
    Nov 19, 2007
    I have a large shank ( WSM action) Shilen stainless select match in 260 remington. 26",1:8 twist varmint contour. 78 rounds down the tube.
    $250 shipped TYD.

    Mike