Load data needed for 160 gr barnes tsx flat base for 7mm

[Shawn62085]

Wanted to see if anyone had so good loads for these never shot them b4 just seeing what you guys though they are 160 gr tsx flat base bullets for the 7mm

Thanks!

 

[Steel Rain]

I'm not at home right now but if I recall correctly my load is as follows and is shot out of a factory Remmy 700 7 Rem Mag.

Winchester Brass
Fed 215M
H4831SC 65ish grains
Bullet is seated fifty thousandths off the lands

As always work up from book recommendation to be safe. I get a half to three quarter MOA with my weapon.