Lilja barrel blank (.284") Kimber Montana Dupe

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by Supertrucker, Jan 1, 2012.

  1. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    I have a new Lilja barrel blank, unchambered in .284"(7mm) bore. It is stainless, 1-10" twist and is a factory duplicate of the Kimber Montana 84M (or a #1). It should handle bullet weights from 120-160gr. It is currently 28 1/4" long. The shank is 2.75" long and it is .530" at the muzzle (according to the Lilja website. I just want what I have into it, $325 shipped (with no 12 week wait). No trades at this time.
     
  2. Derek M.

    Derek M. Well-Known Member

    Messages:
    2,417
    Joined:
    Jul 12, 2004
    how many grooves?

    may I ask why you are selling?

    did you change your mind on bbl choice and going for another brand?
     

  3. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009

    6 groove.
    Just decided to stick with the rifles I have (and short on funds)
    Lilja is just one of a few that will make a #1 in SS
     
  4. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Upppp
     
  5. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Again
     
  6. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Move it up
     
  7. th82457

    th82457 Well-Known Member

    Messages:
    331
    Joined:
    Jul 5, 2011
    Do you know if this would work on a 84L Montana to be chambered in .280 Rem. or maybe .284 Win. ?
     
  8. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009

    Yes, it should work just fine for either. The shank on my 280 AI is 1.5" and the shank on the bbl blank is 3".
     
  9. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Take it up!
     
  10. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Bump^
     
  11. fkroosher

    fkroosher Well-Known Member

    Messages:
    112
    Joined:
    Aug 7, 2011
    would this fit a 700 LA ? It currently has a varmint contour in 25-06. Want a 7x57. Fred
     
  12. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Yes it will Fred. It is unthreaded and unchambered.
     
  13. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Update:

    This will not fit a Rem 700, the barrel shank is 1.045" in diameter. So it is set up to fit the smaller diameter Kimber 84M only.

    $250 shipped
     
  14. Supertrucker

    Supertrucker Well-Known Member

    Messages:
    140
    Joined:
    Feb 4, 2009
    Bump