Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
The Basics, Starting Out
How to figure how many clicks
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="eshell" data-source="post: 172568" data-attributes="member: 5747"><p>IMHO:</p><p></p><p>If you zero at 150, forget how much the bullets "drops" at that range -- You're already zeroed there and it's "dead on" . . . correct? This becomes the "0" reference - no need to make this part hard to deal with.</p><p></p><p>FWIW, mixed use of "drop" and "bullet path", then going to "clicks" is creating unnecessary confusion for you. The only reason I would even mention "inches" below is to help visualize this, and once you do, I would also stop mixing those in . . .</p><p></p><p></p><p></p><p>Something doesn't seem to be right here - drop seems odd for the example, "clicks" don't match . . .</p><p></p><p>The example: The difference between 150 and 200 is 9.77-5.36 and would be 4.41". At 200 yards, 4.41" is equal to 2.1 MOA, and if you have 1/4 MOA clicks, you definitely aren't going to use 4.1 clicks . . . Nothing makes sense to me, with the ballistics themselves or the explanation. . . </p><p></p><p></p><p></p><p>OK then that's the goal, so let's just start over right here, forget what we didn't understand and keep it clean from here on out. . . </p><p></p><p>For simplicity, I use, and would recommend, running your charts in "dual MOA" mode . . . if we really think we need "clicks", they'll be easy to get later, but they are VERY hard to "think in" now. . . .</p><p></p><p>So:</p><p></p><p>Running a 160 GK at 2,800 fps, with an assumed scope-over-bore height of 1.75", zeroed dead-nuts at 150, and running the charts at sea level and standard metro conditions, my version of Infinity says this:</p><p></p><p>150 = "0" = dead on = bullet lands behind the crosshair.</p><p></p><p>200 = 2.04" low = 0.98 MOA = 4 each 1/4 MOA clicks in the "Up" direction</p><p></p><p>250 = 5.57" low = 2.13 MOA = 9 each 1/4 MOA clicks, also "Up"</p><p></p><p>300 = 10.69" low = 3.4 MOA = 14 each 1/4 MAO clicks "Up"</p><p></p><p>350 = 17.54" low = 4.79 MOA = 19 each 1/4 MOA clicks "Up"</p><p></p><p>400 = 26.26" low = 6.27 MOA = 25 each 1/4 MOA clicks "Up"</p><p></p><p>Then, the direct answer to your question is that, with a good 150 yard zero, </p><p>you need 25 clicks "Up" to be back on at 400 . . .</p><p></p><p>MOA values must be divided by .25 and rounded to give "Clicks". As one can see, by the time you get to 400, your number of clicks is getting hard to keep track of, and I would recommend using the graduations on your turret, which I assume are in MOA and divided with 1/4 MOA hash marks to make these adjustments . . .</p><p></p><p>I would recommend getting to a range and shooting this data, both to prove it out and for your own understanding.</p><p></p><p>Is this what you are asking, or am I confused?</p></blockquote><p></p>
[QUOTE="eshell, post: 172568, member: 5747"] IMHO: If you zero at 150, forget how much the bullets "drops" at that range -- You're already zeroed there and it's "dead on" . . . correct? This becomes the "0" reference - no need to make this part hard to deal with. FWIW, mixed use of "drop" and "bullet path", then going to "clicks" is creating unnecessary confusion for you. The only reason I would even mention "inches" below is to help visualize this, and once you do, I would also stop mixing those in . . . Something doesn't seem to be right here - drop seems odd for the example, "clicks" don't match . . . The example: The difference between 150 and 200 is 9.77-5.36 and would be 4.41". At 200 yards, 4.41" is equal to 2.1 MOA, and if you have 1/4 MOA clicks, you definitely aren't going to use 4.1 clicks . . . Nothing makes sense to me, with the ballistics themselves or the explanation. . . OK then that's the goal, so let's just start over right here, forget what we didn't understand and keep it clean from here on out. . . For simplicity, I use, and would recommend, running your charts in "dual MOA" mode . . . if we really think we need "clicks", they'll be easy to get later, but they are VERY hard to "think in" now. . . . So: Running a 160 GK at 2,800 fps, with an assumed scope-over-bore height of 1.75", zeroed dead-nuts at 150, and running the charts at sea level and standard metro conditions, my version of Infinity says this: 150 = "0" = dead on = bullet lands behind the crosshair. 200 = 2.04" low = 0.98 MOA = 4 each 1/4 MOA clicks in the "Up" direction 250 = 5.57" low = 2.13 MOA = 9 each 1/4 MOA clicks, also "Up" 300 = 10.69" low = 3.4 MOA = 14 each 1/4 MAO clicks "Up" 350 = 17.54" low = 4.79 MOA = 19 each 1/4 MOA clicks "Up" 400 = 26.26" low = 6.27 MOA = 25 each 1/4 MOA clicks "Up" Then, the direct answer to your question is that, with a good 150 yard zero, you need 25 clicks "Up" to be back on at 400 . . . MOA values must be divided by .25 and rounded to give "Clicks". As one can see, by the time you get to 400, your number of clicks is getting hard to keep track of, and I would recommend using the graduations on your turret, which I assume are in MOA and divided with 1/4 MOA hash marks to make these adjustments . . . I would recommend getting to a range and shooting this data, both to prove it out and for your own understanding. Is this what you are asking, or am I confused? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
The Basics, Starting Out
How to figure how many clicks
Top