Hornady .257" 134 ELD-M

I'm shooting the 134gr ELD-M in a custom Tikka. 24" bbl , chambered in 25-284. fluted Brux 3 contour in a 1-7 twist. Custom Manson reamer . I had set up for the 134gr to have the boat tail shank junction just slightly above the neck shoulder junction. It's accurate and fast.

The load I settled on was 3163 fps with RL-26. SD-2.2/ES-4. Shoots under a inch at 300 yards.

25 Creedmoor/115 Berger Hunter left. 25-284/134gr ELD-M right.

My 25 Creedmoor 115gr Berger load out of a 24" 1-7 twist Brux is 3172 fps. I have shot 4 Mule deer with this load. All bang flops.

I haven't had a chance to take a deer with the 134gr ELD-M load yet but I am going to use it on Rockchucks here shortly.
IMG_6721.jpeg
IMG_6718.jpeg
IMG_5140.jpeg
 
Last edited:
I'm shooting the 134gr ELD-M in a custom Tikka. 24" bbl , chambered in 25-284. fluted Brux 3 contour in a 1-7 twist. Custom Manson reamer . I had set up for the 134gr to have the boat tail shank junction just slightly above the neck shoulder junction. It's accurate and fast.

The load I settled on was 3163 fps with RL-26. SD-2.2/ES-4. Shoots under a inch at 300 yards.

25 Creedmoor/115 Berger Hunter left. 25-284/134gr ELD-M right.

My 25 Creedmoor 115gr Berger load out of a 24" 1-7 twist Brux is 3172 fps. I have shot 4 Mule deer with this load. All bang flops.

I haven't had a chance to take a deer with the 134gr ELD-M load yet but I am going to use it on Rockchucks here shortly.
View attachment 572296View attachment 572297View attachment 572298
Would you mind sharing the reamer specs print sheet? Very interested
 

Recent Posts

Top