Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Help with Flyers
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="WildRose" data-source="post: 1245666" data-attributes="member: 30902"><p>For myself most fiers are due to something I'm doing, just not being patient enough. If your reticle is loose though and bouncing around that could certainly cause it.</p><p></p><p>You might just want to try seating them out a bit longer and see if that helps.</p><p></p><p>If you have the ability to do so it would also make a lot of sense to see what they are doing out at 200-300yds. If they are failing to stabilize properly all kinds of weird stuff can happen.</p><p></p><p>Also if you aren't doing so already you might want to try weight sorting your brass and checking the thickness of the brass in the neck. If your neck tension is not consistent that can certainly cause fliers.</p><p></p><p>One thing for sure, I learned long ago that when I get frustrated I need to walk away from it and do something else otherwise I get to pushing it and causing more problems than I had to start with.</p></blockquote><p></p>
[QUOTE="WildRose, post: 1245666, member: 30902"] For myself most fiers are due to something I'm doing, just not being patient enough. If your reticle is loose though and bouncing around that could certainly cause it. You might just want to try seating them out a bit longer and see if that helps. If you have the ability to do so it would also make a lot of sense to see what they are doing out at 200-300yds. If they are failing to stabilize properly all kinds of weird stuff can happen. Also if you aren't doing so already you might want to try weight sorting your brass and checking the thickness of the brass in the neck. If your neck tension is not consistent that can certainly cause fliers. One thing for sure, I learned long ago that when I get frustrated I need to walk away from it and do something else otherwise I get to pushing it and causing more problems than I had to start with. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Help with Flyers
Top