help me with savage 11FCNS

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by fieldsj66, Aug 15, 2011.

  1. fieldsj66

    fieldsj66 Active Member

    Messages:
    44
    Joined:
    Aug 15, 2011
    newbie here.

    this rifle in a 300 wsm looks to be my choice for a entry level gun. looking for a 6-800 yard rifle.

    it has the accutrigger and the accustock.

    help me out with opinions and guidance. does the accustock still need to be bedded?

    i'm planning on using my leupold 30mm vx3 4.5x14x40

    IM email or post
     
  2. MHO

    MHO Well-Known Member

    Messages:
    600
    Joined:
    Dec 28, 2010
    Yes that's a great caliber. As far as bedding and accurizing it, I wouldn't at first. I would work up some loads and see what it likes then if your not happy take the next steps.
     

  3. backwoods83

    backwoods83 Well-Known Member

    Messages:
    2,206
    Joined:
    Jan 8, 2011
    You will likely not even notice a difference in that rifle by glass bedding it, its already solid, my opinion is a 26" sendero contour brux or shilen barrel and a bell and carlson medalist A2 after you've had some fun with the factory pencil barrel, although I'm sure it will shoot .75 moa or better as is.
     
  4. fieldsj66

    fieldsj66 Active Member

    Messages:
    44
    Joined:
    Aug 15, 2011
    thanks for the replies guys.

    i just didn't know if all the hubub about the accustock was accurate........