Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
gunsmithing-rem.700 -270wsm jams
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="James Jones" data-source="post: 187300" data-attributes="member: 8843"><p>It sounds to me like either the case heads are to big or the bolt face is a little to tight if your having to wiggle the case free. I doubt that a Sako Extractor would fix the problem , check your cases with a ic and see just how wide the rim is then check the ID of the bolt face with your dial calipers.</p><p> </p><p>They say that the Remingtons dont feed the rounds WSM's smaller than the 300WSM because of the wide steep shoulder makes thr round want to kinda jump out of the magazine. They can fix alot of that trouble by makeing a bevel instaed of the regular strait countersink for the bolt nose.</p><p> </p><p>On the Jamming ,I'm with Coyboy , what kind of jam was it , did it jam comming out of the magazine or did it get stuck while closing the bolt? If its a magazing problem you can probablyfix that with the use of a Wyatt's mag box with the center feed follower/</p></blockquote><p></p>
[QUOTE="James Jones, post: 187300, member: 8843"] It sounds to me like either the case heads are to big or the bolt face is a little to tight if your having to wiggle the case free. I doubt that a Sako Extractor would fix the problem , check your cases with a ic and see just how wide the rim is then check the ID of the bolt face with your dial calipers. They say that the Remingtons dont feed the rounds WSM's smaller than the 300WSM because of the wide steep shoulder makes thr round want to kinda jump out of the magazine. They can fix alot of that trouble by makeing a bevel instaed of the regular strait countersink for the bolt nose. On the Jamming ,I'm with Coyboy , what kind of jam was it , did it jam comming out of the magazine or did it get stuck while closing the bolt? If its a magazing problem you can probablyfix that with the use of a Wyatt's mag box with the center feed follower/ [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
gunsmithing-rem.700 -270wsm jams
Top