Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Frustrated...need help!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="eklarsen" data-source="post: 1785426" data-attributes="member: 93902"><p>First, you cannot check the headspace measurement with a primer seated, exactly for the reasons you described, decap them before measuring. </p><p>Second, as you are using a two die set, which I assume is a full length sizing die, you do not need to really concern yourself with the headspace measurement as that die will set the brass to a minimum spec to fit all SAMMI chambers. </p><p></p><p>Screw it in until it bottoms on the shellholder, then just a gnat's *** more to get a bit of cam over and you are good to go. get that going then we will talk about body dies and setting shoulder back etc..</p></blockquote><p></p>
[QUOTE="eklarsen, post: 1785426, member: 93902"] First, you cannot check the headspace measurement with a primer seated, exactly for the reasons you described, decap them before measuring. Second, as you are using a two die set, which I assume is a full length sizing die, you do not need to really concern yourself with the headspace measurement as that die will set the brass to a minimum spec to fit all SAMMI chambers. Screw it in until it bottoms on the shellholder, then just a gnat's *** more to get a bit of cam over and you are good to go. get that going then we will talk about body dies and setting shoulder back etc.. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Frustrated...need help!
Top