Forming 338 Win Mag from 300 Win Mag?

[Equalizer]

I have 255 pieces of once fired 300 Win Mag brass (Federal) but don't have a 300 Win Mag. Would this just be running em through a full length sizer die to neck up to .338"? Or will it be Multiple stages? Would I have to turn/ream necks?

 

[bigngreen]

A 338 Win is shorter, you can do it but your looking at pushing the shoulder back, necking up and some trimming for length at a minimum.

 

[jjmp]

Make sure you anneal those cases it will help,your new cases will have less internal volume and hold less powder so work back up to safe pressure ,cheers

 

[AZShooter]

IMO best thing is to recycle it. Federal brass is not that great. Besides when necking down you will be making very thick necks from the body of the brass. Buy some new 338 win mag brass.

 

[Equalizer]

Thanks gentlemen that's the information I was looking for. I'll get 338 brass.

 

[jjmp]

Or trade that brass , not everyone can buy , life's different for us all . Cheers

 

[Equalizer]

Good idea! I'll post it in the classifieds area... I was considering using it just to be resourceful but if someone else could use it in its original form it would be better. Thanks for the perspective everyone