Duracoated my 338 Edge

gamedog

Well-Known Member
Joined
Aug 16, 2007
Messages
591
Location
Bull Mtns MT
Thanks to a good buddy, she's dressed to kill:D

After seeing TMR's twins, my rifle was " Green with envy"

I'll take her on it's maiden voyage next month to Alaska and see if it'll push a 300gr SMK through both shoulders of a Black Beargun)

SANY0409.jpg


SANY0411.jpg


SANY0406.jpg
 
Hey, that looks familiar:D:D:D

Nice job. Be carefull for a couple weeks with the bore solvent. After that, the stuff is bullet proof.
 
The barrel is a 28" Lilja in a Sendero taper. It's a shooter. Here's a 3 shot group @ 100yards. 1/2" outside to outside.
SANY0418-1.jpg
 
Gamedog,

What's your load for the 1/2" group? OAL also if you will.

I just bought a Lilja #7 contour, 28" finish .338 for a future Edge build and plan to shoot the 300's.
 
Warning! This thread is more than 17 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top