DIY klinsky Rail Bipod Adapter

Discussion in 'Long Range Hunting & Shooting' started by Clayne B, Jul 7, 2012.

  1. Clayne B

    Clayne B Well-Known Member

    Messages:
    512
    Joined:
    Nov 15, 2011
    I have had a few people ask me about this adapter so here it is.
    ABS was used to make this. it slides with a little bit of force. And when the bipod is tightened down it really dose not move. You will have to take the Rail out of the stock to slide it in.

    Tools used,
    Ban saw
    Belt sander
    Drill
    Tap
    Drill Bit
    Hand Files
    Measuring Tape
    Beer

    Here are a few pictures

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

  2. SidecarFlip

    SidecarFlip Well-Known Member

    Messages:
    4,113
    Joined:
    Dec 12, 2011
    Very nice. I take it the brand of beer and the quantity has a direct relationshop on the final product........:)
     

  3. Clayne B

    Clayne B Well-Known Member

    Messages:
    512
    Joined:
    Nov 15, 2011
    it works
     
  4. SidecarFlip

    SidecarFlip Well-Known Member

    Messages:
    4,113
    Joined:
    Dec 12, 2011
    .................The beer or the sling stud.......:)
     
  5. Clayne B

    Clayne B Well-Known Member

    Messages:
    512
    Joined:
    Nov 15, 2011
    Both... ha ha
     
  6. WildRose

    WildRose Well-Known Member

    Messages:
    8,113
    Joined:
    Feb 3, 2011
    Nice job.