Custom rifles 1917 and Mauser

Discussion in 'Guns For Sale' started by spitfire_er, Jan 2, 2012.

  1. spitfire_er

    spitfire_er Well-Known Member

    Messages:
    130
    Joined:
    Aug 2, 2009
    Well, I hate to sell these custom rifles, but I found my dream car, and these are up first.

    First is a 1917 enfield that I built a couple years ago in .308 Norma Mag.

    I used:
    -Hart #4 Hart Barrel 26" 1-10" SS
    -Cock on Open
    -Bent bolt handle
    -action lapped (raceway and lugs) super smooth
    -Barrel floated
    -Timney trigger
    -Weaver bases/rings
    -Nikon Monarch 3-9X40
    -Receiver contoured
    -Trigger gaurd straightened and contoured
    -Firing pin lightened
    -feeding rails opened for reliable feeding
    -New blue job.
    -Rem Model 30 bolt stop
    -Cottonwood custom stock done in old Fajen style. Gaboon ebony side caps, and spalted coolibah accent wood on bottom.
    -1" decelorator pad
    -bedded in Devcon steel

    This is a top notch rifle and hold a true 1/2" MOA at 100 yards with 5 shots. I have not taken it past 100, but if it is like my other rifles it will hold 1/2" MOA out to 500 plus. I will include my load data with rifle.

    This rifle was finished last year with the bluing. I love this gun, but I want my dream car more!

    The stock could use a little attention, but from 5 feet away it looks great. Nothing wrong with it, I just never finished the finishing coats. Used Tru-oil on this one, so it is fairly easy to work with.

    If you want for FREE, I can mount this barreled action in any stock you supply and put a satin finish on it or leave it unfinished. A high gloss finish takes quite a bit more time, so I'm not offereing that.

    The smaller group is 3 shots, and the larger 1/2" group is 5 both at 100 yards.

    I have 25 rounds fired through this new Hart barrel, so this is basically a brand new rifle.

    Looking to get $1,000 obo
     

    Attached Files:

    Last edited by a moderator: May 4, 2012
  2. spitfire_er

    spitfire_er Well-Known Member

    Messages:
    130
    Joined:
    Aug 2, 2009
    Next up is the first rifle that I built.

    It is a Mauser K98 Isreal refurb. I can't recall the manufacture, but it is not one of the sabature ones.

    -Receiver blueprinted.
    -bolt face/lugs squared
    -wears a Adams & Bennett .220 swift F54 barrel CM 1-14"
    -FN mauser shroud.
    -Bold trigger W/safety
    -Devcon bedded and pillared.
    -Bottom metal set in glass
    -Floated barrel
    -Tiger stripe Exhibition grade stock
    -Parkerized receiever
    -Ceramakote paint on Barrel.
    -Leupold bases/rings
    -intensity optics 4-12x44 scope.

    Holds just over 1/2" at 100 yards. I never got around to doing good load development on it, so it may do better. High gloss Tru-oil finish. Is worn on the top and bottom of the toe and comb of stock. For asking price, I'll re-finish it. When I buffed it out, I buffed too hard in these spots. Has 75 rounds down the barrel.

    This is a nice little rifle, but I want my dream car.

    looking to get $900 obo.
     

    Attached Files:


  3. spitfire_er

    spitfire_er Well-Known Member

    Messages:
    130
    Joined:
    Aug 2, 2009
    Forgot to mention, I'll sell the 1917 enfield for $750 plus shipping for the barreled action.

    also I made a mistake with the Mauser I was looking for $800 obo, not 9.
     
  4. spitfire_er

    spitfire_er Well-Known Member

    Messages:
    130
    Joined:
    Aug 2, 2009
    1917 enfield is SPF
     
  5. spitfire_er

    spitfire_er Well-Known Member

    Messages:
    130
    Joined:
    Aug 2, 2009
    These have both been sold!