• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

Custom Pre'64 M70 , 25-06 Rem.

antleredacres

Well-Known Member
Joined
Feb 9, 2014
Messages
1,022
Custom 25-06 Remington, Winchester Pre '64 Fwt action, Skeletonized Magazine Box, Timney Trigger (adjustable, presently set at 48 oz.), New extractor, Socket head guard screws, 8x40 receiver holes, all metal (except SS Barrel) has been Cerakoted Graphite Black. Barrel is Douglas XX Stainless, Natural Bead Blast Finish. Stock is Manners EH 3, Pillars installed, Pachmayr Decelerator Pad, 13.5" LOP. Karl Kampfeld, Kampfeld Customs, did barrel install, machining, trigger install, and stock fitting. Brandon Burkhart, Custom Gun Coatings, finished the stock with a grey base color/black webbing. Shot very little. No load development. I shot some factory loads I had and 3 shots were under an inch (my notes list approx. .75") so it has potential for some very accurate groups with load development. Doing some safe thinning and I'm pretty solid in .257 Caliber, hence the only reason for selling. $1795 + $55 ship to lower 47. Sorry, no CA or international sales. AK actual cost to ship. postal MO or Bank Certified Cashiers Check. As always, Thanks for looking. PS: Pictures did not turn out very well. Barrel is 23" and weight is a bit over 7 Ibs.
 

Attachments

  • DSCN1557.JPG
    DSCN1557.JPG
    182.9 KB · Views: 155
  • DSCN1558.JPG
    DSCN1558.JPG
    244.2 KB · Views: 150
  • DSCN1559.JPG
    DSCN1559.JPG
    238.6 KB · Views: 140
  • DSCN1560.JPG
    DSCN1560.JPG
    317.3 KB · Views: 146
  • DSCN1561.JPG
    DSCN1561.JPG
    227.1 KB · Views: 140
  • DSCN1562.JPG
    DSCN1562.JPG
    222.8 KB · Views: 136
  • DSCN1563.JPG
    DSCN1563.JPG
    182.1 KB · Views: 133
  • DSCN1564.JPG
    DSCN1564.JPG
    115 KB · Views: 132
  • DSCN1565.JPG
    DSCN1565.JPG
    91.6 KB · Views: 118
  • DSCN1567.JPG
    DSCN1567.JPG
    172 KB · Views: 154
Last edited:
Custom 25-06 Remington, Winchester Pre '64 Fwt action, Skeletonized Magazine Box, Timney Trigger (adjustable, presently set at 48 oz.), New extractor, Socket head guard screws, 8x40 receiver holes, all metal (except SS Barrel) has been Cerakoted Graphite Black. Barrel is Douglas XX Stainless, Natural Bead Blast Finish. Stock is Manners EH 3, Pillars installed, Pachmayr Decelerator Pad, 13.5" LOP. Karl Kampfeld, Kampfeld Customs, did barrel install, machining, trigger install, and stock fitting. Brandon Burkhart, Custom Gun Coatings, finished the stock with a grey base color/black webbing. Shot very little. No load development. I shot some factory loads I had and 3 shots were under an inch (my notes list approx. .75") so it has potential for some very accurate groups with load development. Doing some safe thinning and I'm pretty solid in .257 Caliber, hence the only reason for selling. $1795 + $55 ship to lower 47. Sorry, no CA or international sales. AK actual cost to ship. postal MO or Bank Certified Cashiers Check. As always, Thanks for looking.
More pics
 

Attachments

  • DSCN1568.JPG
    DSCN1568.JPG
    175.6 KB · Views: 75
  • DSCN1569.JPG
    DSCN1569.JPG
    341 KB · Views: 71
  • DSCN1570.JPG
    DSCN1570.JPG
    110.6 KB · Views: 74
  • DSCN1571.JPG
    DSCN1571.JPG
    156.5 KB · Views: 71
Nice rifle, a gun built around something other than a 700 knockoff for once.

Good luck with the sale.
 
Top