Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Custom Barrelled Action vs Full Custom Build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="dwm" data-source="post: 1186822" data-attributes="member: 1136"><p>Wow you guys go all out. I just bedded one too...</p><p></p><p>Course sandpaper from the garage</p><p>Blue masking tape to mask off stock </p><p>Electrical tape to mask off recoil lug and Savage nut</p><p>Devon steel epoxy in the tube</p><p>Q tips from the bathroom</p><p>Paper towels from the kitchen</p><p>Rubbing alchol from bathroom to clean up with</p><p></p><p>And I used Emperial Sizing Wax from the reloading bench as the release agent.</p><p></p><p>I use the action screws to hold the stock, put some release agent on them they come right back out. Screw them in to seat the action then back them off a quarter turn or so. Drill action holes back out with hand drill later.</p><p></p><p>If I spent over $25 I would be surprised...</p><p></p><p>The sizing wax is awesome, action popped right out, didn't stick at all. Came out nice for a do it yourself bedding job....</p></blockquote><p></p>
[QUOTE="dwm, post: 1186822, member: 1136"] Wow you guys go all out. I just bedded one too... Course sandpaper from the garage Blue masking tape to mask off stock Electrical tape to mask off recoil lug and Savage nut Devon steel epoxy in the tube Q tips from the bathroom Paper towels from the kitchen Rubbing alchol from bathroom to clean up with And I used Emperial Sizing Wax from the reloading bench as the release agent. I use the action screws to hold the stock, put some release agent on them they come right back out. Screw them in to seat the action then back them off a quarter turn or so. Drill action holes back out with hand drill later. If I spent over $25 I would be surprised... The sizing wax is awesome, action popped right out, didn't stick at all. Came out nice for a do it yourself bedding job.... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Custom Barrelled Action vs Full Custom Build
Top