Full custom 30-06AI build with exactly 120 rounds of factory Lapua '06 rounds down the tube for fire forming. 1x fired brass has been deprimed and cleaned, is ready to load, and will come in the original factory boxes that held the ammo.
Specs:
*Defiance Deviant with 20moa integrated rail and DLC coating on receiver and bolt
*Manners EH1 with 3 swivel studs
*Proof Carbon Sendero 1:9" twist 24" barrel w/ 5/8x24 threaded muzzle (no muzzle device included)
*Trigger Tech Diamond
*Magpul DBM with 1 magazine (5round)
*weight is just under 7.5 pounds bare rifle on kitchen scale
Also included are the above mentioned 120 pieces of 1x fired Lapua 30-06 brass that has been formed to this chamber, as well as a new unused Redding Full Length size/seating die set for the 30-06AI. This package would run you well over $4k for just parts/brass/dies, plus extra for gunsmithing services...my lack of time to play with it equates to a big savings for you.
$3600 obo shipped from my FFL to yours (my FFL charges quite a bit for shipping, but they do a great job of packaging and getting it to yours safely). If in the D/FW area of Texas, we can knock out the price of shipping with a FTF meet up.
No trades, unless you have an interesting older 4x4 truck/jeep/etc project for me to work on with my son for his first vehicle.
Please PM with questions.
Update:
INCLUDED FOR FREE- Now throwing in these three boxes of 181 Hammer Hunters (50 count per box, 150 total) for anyone on the fence. Since I bought these, Hammer has actually updated their recommendation on twist rate to 9.5, which means you're still good to go with this 9 twist barrel.
Specs:
*Defiance Deviant with 20moa integrated rail and DLC coating on receiver and bolt
*Manners EH1 with 3 swivel studs
*Proof Carbon Sendero 1:9" twist 24" barrel w/ 5/8x24 threaded muzzle (no muzzle device included)
*Trigger Tech Diamond
*Magpul DBM with 1 magazine (5round)
*weight is just under 7.5 pounds bare rifle on kitchen scale
Also included are the above mentioned 120 pieces of 1x fired Lapua 30-06 brass that has been formed to this chamber, as well as a new unused Redding Full Length size/seating die set for the 30-06AI. This package would run you well over $4k for just parts/brass/dies, plus extra for gunsmithing services...my lack of time to play with it equates to a big savings for you.
$3600 obo shipped from my FFL to yours (my FFL charges quite a bit for shipping, but they do a great job of packaging and getting it to yours safely). If in the D/FW area of Texas, we can knock out the price of shipping with a FTF meet up.
No trades, unless you have an interesting older 4x4 truck/jeep/etc project for me to work on with my son for his first vehicle.
Please PM with questions.
Update:
INCLUDED FOR FREE- Now throwing in these three boxes of 181 Hammer Hunters (50 count per box, 150 total) for anyone on the fence. Since I bought these, Hammer has actually updated their recommendation on twist rate to 9.5, which means you're still good to go with this 9 twist barrel.
Last edited:
