Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullets sticking in seating plug
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Alibiiv" data-source="post: 1701368" data-attributes="member: 69192"><p>My .02c worth. I suggest tightening the neck tension. I use a Sinclair neck sizing mandrel, will never use any other method after using one. I full length resize without the expander plug and then resize the neck with the correct sized mandrel. I find this system to be easy, accurate and it pushes the brass where I believe it ought to be when resizing. If you want more tension on the necks you can either buy a smaller mandrel or polish the original one to a smaller diameter to increase neck tension. I would also contact RCBS, tell them the bullet that you are seating and ask if they have a different seating plug that will work on your bullets. If you chuck the seating plug up in a drill press or drill you ought to be able to sand/polish a decent radius in the area where the bullet meets the plug.</p></blockquote><p></p>
[QUOTE="Alibiiv, post: 1701368, member: 69192"] My .02c worth. I suggest tightening the neck tension. I use a Sinclair neck sizing mandrel, will never use any other method after using one. I full length resize without the expander plug and then resize the neck with the correct sized mandrel. I find this system to be easy, accurate and it pushes the brass where I believe it ought to be when resizing. If you want more tension on the necks you can either buy a smaller mandrel or polish the original one to a smaller diameter to increase neck tension. I would also contact RCBS, tell them the bullet that you are seating and ask if they have a different seating plug that will work on your bullets. If you chuck the seating plug up in a drill press or drill you ought to be able to sand/polish a decent radius in the area where the bullet meets the plug. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullets sticking in seating plug
Top