41Magnum
Well-Known Member
Actually a center grip but would take either, in 6.5 Creedmoor or 6.5 x 284, or 7mm-08, or 308, or…………..
Bolt action pistol build
- Thread starter Ricky C
- Start date
Help Support Long Range Hunting Forum
Ernie
SPONSOR
Nosler Independence is the easy button for a center-grip SPActually a center grip but would take either, in 6.5 Creedmoor or 6.5 x 284, or 7mm-08, or 308, or…………..
41Magnum
Well-Known Member
Ernie,
Tell me your thoughts on the Nosler M48 handgun. I'm cleaning out the gun-safe of a few things I either don't or rarely use anymore to use towards the purchase of one.
Left Hand Dave
Well-Known Member
Ernie
SPONSOR
Just bought one recently-6mm Creedmoor.
It shoots good, right around 1/2 MOA after shooting factory ammo through it.
I have a EC Tuner brake for it, but have not shot it with that brake yet.
Ran it out to 600 yards or so on steel with success.
Getting a good grip for it is the main challenge, but a friend has it figured out I think.
He hasn't shot it yet, since the modification.
Basically, you want it smooth/slick on the bottom like a McMillan or H-S would be, with a similar angle, while the bottom of the grip is parallel with the forend/barrel
Ernie
SPONSOR
The current production has a new and improved trigger-YES!!!!
Ernie
SPONSOR
As a lefty, I agree!Actually that was one of the things they got right
Look for a Savage Striker, I have two of them. One I used on a custom frame and am getting ready to put a .308 barrel on it. I've got another one that is stock but with a Rifle Basix trigger. It's in 7mm-08 and shoots as well as my M48 in 6.5 CM. I have Striker barrels in 17 Fireball, 250 Savage Imp, 6mmbr and two barrels in .308.
41Magnum
Well-Known Member
Well the M48 pistol is readily available in 6.5 Creedmoor but in 308 or 7mm-08 are scarce. I'm wanting one in 308 for elk.
muleystalker
Well-Known Member
Jim Borden makes an ALPINE XP-100 acton now. He makes 2 model one for a rear grip stock and one for a mid grip stock.
