264MHC
Well-Known Member
I am posting for sale a variety of AR15 parts.
First up are 2 Stocks and a Pistol Brace.
The first stock is the Magpul Moe Fixed carbine stock, mil-spec diameter, in black with both styles of receiver extension cover to allow access to a qd endplate or go for a more streamlined look with the receiver (how I had it). It includes the QD sling cups installed on both sides, and the PRS Extended rubber butt pad, which were both additional accessories. With the standard butt pad, the LOP is 12.5", swapping to the extended pad makes it 13.3". This stock is very solid with no movement whatsoever and installs easily with one screw. It will work on any AR15 Carbine receiver extension as well as A5/AR10 length receiver extensions. It weighs 10.5oz. It looks basically unused. Asking $50 Shipped.
Next is a Luth-AR MBA-5 Collapsible stock. This stock will fit mil-spec or commercial buffer tubes. It installs easily with no tools and the lever is easily accessible for adjustments. It also has a tensioning screw that locks it up solid to the buffer tube. This stock works really well for riding a rear bag with its extended lower parallel section, something most AR stocks lack. Also like new condition. Asking $35 Shipped.
Next is a Shockwave Blade 2M Pistol Stabilizing Brace. This one fits mil-spec buffer tubes and can be adjusted fore and aft without tools. It is very light at only 5oz and relatively comfortable if you accidentally shoulder your pistol. Be aware of local laws regarding pistols with braces but this one is ATF approved as a brace. This was on my HD gun and barely left the house. Asking $30 Shipped.
Next is an ERGO Tactical Deluxe Grip.
This is the standard angle ambidextrous tactical deluxe rubberized suregrip with a beavertail. It is very comfortable and fills my size XL hands nicely. It includes a 3/16 Hex socket cap grip screw, a sticker, and their "gapper" insert for filling the void left by removable trigger guard lowers. Please note this is not the original packaging, but one from a different Ergo Grip. I just put it in there to keep it clean and keep the parts together. Asking $25 Shipped
And Lastly, is a 2A Arms Buffer Tube.
This is their 8 Position billet machined, fluted buffer tube, A5/ AR 10 Carbine length. It is a very high quality part and is slightly lighter at 3.6oz, vs 4.2, than a standard mil-spec tube. It is of course mil-spec diameter, and both of the above stocks fit great. It requires either an A5 buffer with rifle length spring when used with an AR15, or a standard AR15 carbine size buffer with an AR10 Carbine spring when used with an AR-10/LR-308 (DPMS). Asking $40 Shipped.
Let me know if you have any questions by PM. I Accept paypal and venmo. Thanks for looking.
First up are 2 Stocks and a Pistol Brace.
The first stock is the Magpul Moe Fixed carbine stock, mil-spec diameter, in black with both styles of receiver extension cover to allow access to a qd endplate or go for a more streamlined look with the receiver (how I had it). It includes the QD sling cups installed on both sides, and the PRS Extended rubber butt pad, which were both additional accessories. With the standard butt pad, the LOP is 12.5", swapping to the extended pad makes it 13.3". This stock is very solid with no movement whatsoever and installs easily with one screw. It will work on any AR15 Carbine receiver extension as well as A5/AR10 length receiver extensions. It weighs 10.5oz. It looks basically unused. Asking $50 Shipped.
Next is a Luth-AR MBA-5 Collapsible stock. This stock will fit mil-spec or commercial buffer tubes. It installs easily with no tools and the lever is easily accessible for adjustments. It also has a tensioning screw that locks it up solid to the buffer tube. This stock works really well for riding a rear bag with its extended lower parallel section, something most AR stocks lack. Also like new condition. Asking $35 Shipped.
Next is a Shockwave Blade 2M Pistol Stabilizing Brace. This one fits mil-spec buffer tubes and can be adjusted fore and aft without tools. It is very light at only 5oz and relatively comfortable if you accidentally shoulder your pistol. Be aware of local laws regarding pistols with braces but this one is ATF approved as a brace. This was on my HD gun and barely left the house. Asking $30 Shipped.
Next is an ERGO Tactical Deluxe Grip.
This is the standard angle ambidextrous tactical deluxe rubberized suregrip with a beavertail. It is very comfortable and fills my size XL hands nicely. It includes a 3/16 Hex socket cap grip screw, a sticker, and their "gapper" insert for filling the void left by removable trigger guard lowers. Please note this is not the original packaging, but one from a different Ergo Grip. I just put it in there to keep it clean and keep the parts together. Asking $25 Shipped
And Lastly, is a 2A Arms Buffer Tube.
This is their 8 Position billet machined, fluted buffer tube, A5/ AR 10 Carbine length. It is a very high quality part and is slightly lighter at 3.6oz, vs 4.2, than a standard mil-spec tube. It is of course mil-spec diameter, and both of the above stocks fit great. It requires either an A5 buffer with rifle length spring when used with an AR15, or a standard AR15 carbine size buffer with an AR10 Carbine spring when used with an AR-10/LR-308 (DPMS). Asking $40 Shipped.
Let me know if you have any questions by PM. I Accept paypal and venmo. Thanks for looking.
