Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
anybody shooting WC872 in a 7mm Allen?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Fiftydriver" data-source="post: 102566" data-attributes="member: 10"><p>James,</p><p></p><p>For formed cases I would start in the high 90 gr range. Probably something like 98.0 gr or 99.0 gr with the 160 gr Accubond. Seat to 0.015" off the lands to start with until you learn the personality of the rifle and then you can move them closer to the lands after you learn the rifle a bit more and how much pressure X grains of powder will produce. </p><p></p><p>There will be some slight pressure issues using a 4 groove compared to a 3 groove but they will not be dramatic. Using very top loads developed for a 3 groove barrel may be a bit warm, this was what I was concerned about with your barrel.</p><p></p><p>Have a good day,</p><p></p><p>Kirby Allen(50)</p></blockquote><p></p>
[QUOTE="Fiftydriver, post: 102566, member: 10"] James, For formed cases I would start in the high 90 gr range. Probably something like 98.0 gr or 99.0 gr with the 160 gr Accubond. Seat to 0.015" off the lands to start with until you learn the personality of the rifle and then you can move them closer to the lands after you learn the rifle a bit more and how much pressure X grains of powder will produce. There will be some slight pressure issues using a 4 groove compared to a 3 groove but they will not be dramatic. Using very top loads developed for a 3 groove barrel may be a bit warm, this was what I was concerned about with your barrel. Have a good day, Kirby Allen(50) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
anybody shooting WC872 in a 7mm Allen?
Top