Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Advice needed
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Jaeger476" data-source="post: 35899" data-attributes="member: 2625"><p>In addition to the above post.</p><p></p><p> The removal of 3/4" of barrel was required because there was ptting and damage inside the bore for almost a half inch at the muzzle. This I could see with a weak magnifying glass. As for changing powders I am going to see if I can add another half grain of powder and mess with the seating depth a little. I have had really good results with the 4350 in the past amd am reluctant to change until I've exhausted all my options first. Thanks for the input thus far guys I appreciate it.</p></blockquote><p></p>
[QUOTE="Jaeger476, post: 35899, member: 2625"] In addition to the above post. The removal of 3/4" of barrel was required because there was ptting and damage inside the bore for almost a half inch at the muzzle. This I could see with a weak magnifying glass. As for changing powders I am going to see if I can add another half grain of powder and mess with the seating depth a little. I have had really good results with the 4350 in the past amd am reluctant to change until I've exhausted all my options first. Thanks for the input thus far guys I appreciate it. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Advice needed
Top